Using FRITZ!Box Energy-Saving Functions

The FRITZ!Box is designed to use power as economically and efficiently as possible, for instance by automatically minimizing processor power during standby and the energy consumption of ports that are not in use.

Similarly, the modules of the FRITZ!Box adapt their power consumption to current use and reduce it when they are not being used.

WLAN

The wireless module of the FRITZ!Box works in "Green AP mode". This means it is especially energy-efficient: As soon as no more wireless devices are connected with the FRITZ!Box, the energy consumption of the wireless module is automatically reduced to a minimum. "Green AP" operation has no effect on the accessibility of the wireless network for wireless devices, since the new registration of a wireless device automatically ends the mode, thus restoring full wireless functionality to the FRITZ!Box.

You can further reduce the power consumption of the wireless radio network by

  • turning off the wireless radio network with the "WLAN" button whenever no more wireless devices are registered on the FRITZ!Box
  • configuring a switching schedule for the wireless radio network in the "Wireless / Schedule" menu
  • reducing the maximum transmitter power in the "Wireless / Radio Channel" menu.

DSL

As soon as no more data are being exchanged with the Internet, the FRITZ!Box reduces power consumption.

Note:However, power consumption can only be reduced if your DSL provider supports energy-saving measures. Contact your DSL provider for more information.

USB Devices

A USB device connected directly to the FRITZ!Box has a maximum of 500 mA at its disposal. USB devices with higher power consumption (like UMTS modems or hard drives) can be connected to the FRITZ!Box via an active USB hub. Active hubs have their own power supply. In addition, in the FRITZ!Box you can enable an energy-saving function for USB hard drives connected to the FRITZ!Box.

  • The "Energy-saving function enabled" setting for USB hard drives is located under "Home Network / USB Devices / USB Settings". You can also test here whether your USB hard disk supports the energy-saving function.

    When the energy-saving function is enabled, connected USB hard drives will be switched off when they are idle—as long as the hard drives support the energy-saving function.

LAN

The power consumption of each LAN port is minimized automatically whenever no device is connected. In addition, with the "Green Mode" setting, energy-saving settings can be configured for each network device connected to a LAN port.

Green Mode (LAN Port)

Green Mode saves power by reducing the speed of data transmission on the LAN port to 100 Mbit/s. The settings for Green mode are available in the "LAN Settings" area in the "Home Network / Network / Network Settings" menu.