Smart Home

Home Network / Smart Home

On the "Smart Home" page you can register Smart Home devices from AVM with the FRITZ!Box and configure their settings.

Smart Home Device Overview

The overview contains all Smart Home devices from AVM that are registered with the FRITZ!Box or released for sharing in the FRITZ!Box home network.

ColumnLED / ButtonMeaning / Function
Connection icon The device is connected with the FRITZ!Box.
icon The device is not connected with the FRITZ!Box.
Temperature  

On the FRITZ!DECT Repeater 100 and FRITZ!DECT devices with a switchable socket, the temperature measured by the device is displayed (in degrees Celsius)

For precise temperature measurements FRITZ!DECT must be optimally positioned and configured; see Measuring the Temperature with FRITZ!DECT.
Mode  

automatic: For this socket automatic switching or the "Switch off on standby" setting is enabled.

manual: No automatic switching is enabled.
On/Off switch icon

The socket is switched off. Click on the switch to turn the socket on.
icon

The socket is switched on. Click on the switch to turn the socket off.
General icon Opens the socket settings.
Switch Automatically Button Opens the settings for automatic switching.
energy Button Opens the Energy Monitor,
Delete Button

Deletes the device from the FRITZ!Box user interface.

As long as the FRITZ!DECT device is supplied with power, the radio connection to the FRITZ!Box and configure automatic switching remain active.

To clear the radio connection and disable automatic switching, briefly unplug the Smart Home device from the mains.

For a FRITZ!Powerline adapter the button is displayed only if the adapter is no longer connected with the FRITZ!Box.

Register New Device

Here is how to register a new FRITZ!DECT device with the FRITZ!Box:

  1. Click the "Register New Device" button.
  2. Press the "DECT" button on the FRITZ!DECT device until it starts flashing (about 6 seconds).

After registration the FRITZ!DECT device appears in the Smart Home Device Overview.