Editing a Template (Radiator Control)
Smart Home / Groups and Templates / Edit Template )Radiator Control) 
Via the templates, individual radiator controls and groups of radiator controls can be combined and controlled together. You can create new templates, edit them, or make them from existing settings.
General Settings
For all templates you can assign a name and select devices to which the template is to be applied.
| Field | Comment |
|---|---|
| Name of the template | The name used to manage the template within the home network. The name of the template can be changed freely at any time. |
| Device Selection | In the Device Selection you can choose the Smart Home devices and groups to be assigned to the template. |
Settings for the Radiator Control
overview
The following settings are available in the template for radiator controls:
| Setting | Contents / Description |
|---|---|
| Selecting an Automatic Setting | Schedule: For each individual weekday you can specify at what times a previously specified temperature is to be maintained. Outside these times a defined setback temperature is maintained. |
| Vacation switching (party switching): Define up to 4 periods during which the schedule is disabled and a constant temperature is maintained. | |
| "Heat off": Define a period during which the heating is off. | |
| Change temperature until next automatic switching point | You can change the temperature manually. The manually set temperature will be maintained until the next automatic switching point. Important:If you choose this setting, the template will be active only until the next switching point. Afterward the previously applied template will be applied along with its configured schedule, vacation switching and/or "Heating Off". |
Define a period during which the heating is off. The heating valve remains closed during this time and the radiator control is set to an expanded power saving mode to save battery power.
Configuring Automatic Switching
See the following Help pages for instructions on how to configure the automatic switching settings: