Socket
On the "General" tab you find information and basic settings for your Smart Home device.
FRITZ! Actuator
The following information about your Smart Home device (actuator) is presented under "FRITZ! Actuator":
| Information | Meaning |
|---|---|
| model | Product name of your Smart Home device |
| Actuator identification number (AIN) | Every Smart Home device by AVM has an AIN. The AIN is printed on the type label on the back of the device and is displayed here. |
| Actuator version number | Firmware version of the device |
| Name | Name of the device in the user interface. You can assign any name you like. |
Switching State
Available for
This setting is available for Smart Home devices with switchable sockets.
Function
Under "Switching State" you define how the socket should be switched after a power outage. The configured switching state will always be restored after a power outage. Settings on the "Switch Automatically" tab will not be applied.
Example
For "Switching State" the "last state" option is selected. In addition, an automatic switching setting specifies that the socket is off from 12:00 am to 06:00 am daily.
A power outage occurs between 11:50 pm and 12:15 am. The socket is still on at 11:50 pm.
In this case the socket is switched back on at 12:15 am. The time when it was to be switched off (at midnight) has passed and the setting is not applied retroactively.
Energy
Available for
This setting is available for Smart Home devices with switchable sockets.
Function
You can measure the power consumption of connected devices. To do so, enter your electricity rates:
| Field | Enter the Following |
|---|---|
| Electricity rates | Consumption price (or kilowatt-hour rate) of your electricity rate in cent/kWh The consumption price is indicated on your electricity bill and on the website of your electricity provider. |
| CO2 emissions | CO2 emission of your electricity rate in kg/kWh If you only want to measure the power consumption, leave this field blank. The CO2 emissions are indicated on your electricity bill and on the website of your electricity provider, often under the headings "Electricity Disclosure" or "Electricity Mix". |
The result of the measurement is displayed on the "Energy Display" tab.