Smart Home
Home Network / Smart Home
On the "Smart Home" page you can register Smart Home devices from AVM with the FRITZ!Box and configure their settings.
Smart Home Device Overview
The overview contains all Smart Home devices from AVM that are registered with the FRITZ!Box or released for sharing in the FRITZ!Box home network.
| Column | Contents | Meaning / Function |
|---|---|---|
| Connection |  | Device connected with the FRITZ!Box |
 | Device not connected with the FRITZ!Box | |
| Mode | automatic | Automatic switching or "Switch off on standby" enabled for this socket |
| Manual | No automatic switching enabled | |
| Measuring the temperature | Temperature in Celsius | On the FRITZ!DECT Repeater 100 and devices with a switchable socket: the temperature measured by the device (for precise temperature measurements, see Measuring the Temperature with FRITZ!DECT For radiator controls: measured temperature +/- offset (see also Configure an offset) |
| Target temperature |  | Setting a radiator control The configured temperature will be maintained until the next temperature switch specified in the schedule. |
| On/Off switch |  | Socket on Click on the switch to turn the socket off. |
 | Socket off Click once on the switch to turn the socket on. | |
| Edit |  | Open the device settings |
| Delete |  | Remove device from the user interface As long as the FRITZ!DECT device is supplied with power, the radio connection to the FRITZ!Box and configure automatic switching remain active. For a FRITZ!Powerline adapter the button is displayed only if the adapter is no longer connected with the FRITZ!Box. |
Groups
Smart Home devices of the same type can be combined into groups.
Put all devices with a switchable socket (switching actuators) into a single group so that the sockets can be switched on and off together. Put all radiator controls into a single group to configure them together (scheduled switching, vacation switching, periods when heating is off).
Setting Up a New Group
Instructions are presented here:
Register New Device
Here is how to register a new FRITZ!DECT device with the FRITZ!Box:
- Click the "Register New Device" button.
- Press the "DECT" button on the FRITZ!DECT device until it starts flashing (about 6 seconds).
After registration the FRITZ!DECT device appears in the Smart Home Device Overview.
Configuring Automatic Switching and Other Functions
To open the settings of a device, click on the 
button. Various tabs in the settings present the following functions:
| Function | Description | Tab |
|---|---|---|
| Switching state | Determines the switch state upon a restart, for instance after a power outage. | General |
| Manual Switching | Specifies whether or not manual switching is possible (with the button on the device, FRITZ!Fon, MyFRITZ!App or in the user interface) | General |
| Push Service | Sends information on device operation by e-mail, either at regular intervals or whenever certain events occur. | General |
| Automatic Switching | Various Schedules in order to switch the socket on and off automatically at specified times. | Switch Automatically |
| For measuring power consumption | Measure and record the power consumption of connected electrical devices. | Energy Display |