WPA Encryption

WPA mode

The "WPA + WPA2" setting automatically uses the WPA mode most suitable for your connections. In some cases, however, it may be necessary to set a specific WPA mode for the wireless devices used and switch to "WPA2 (CCMP)".

Network key

1. Enter in this field the network key used to secure radio connections.
2. The network key must be between 8 and 63 characters in length. For reasons of security the network key should always be at least 20 characters long. In assigning a password, remember also to comply with the list of valid characters.
3. Click on the "Apply" button to save your settings.

The "Wireless Access" window opens. All information required for the wireless LAN settings in the wireless devices is summarized here. You can print out these settings.

The network key assigned here must also be entered in the wireless LAN settings of the wireless adapter.

Additional Security Settings

Support for Protected Logins by Wireless Devices (PMF)

PMF (Protected Management Frames) is a security feature for wireless LAN connections, and is standardized in accordance with IEEE 802.11w-2009.

PMF is not supported by some older wireless devices (802.11n). Disable the setting if problems occur when registering older wireless devices.

Restricting Wireless LAN Access

With these options you define which wireless devices can connect with the FRITZ!Box:

The "Do not allow any new wireless devices" option does not provide sufficient protection from unauthorized use of your wireless network. To protect the network effectively, enable WPA encryption.