Wireless Environment

Overview

The wireless environment of the FRITZ!Repeater is depicted in two graphs, one for the 2.4-GHz band and one for the 5-GHz band. Using these graphs you can detect channels with a lower load, on which higher throughput rates can be achieved.

Load on of the Current Radio Channel

The graphs show the load on the radio channels currently in use, the share of this load used by the FRITZ!Repeater, and the share used by other wireless networks. Under the graphs you can set the period of time (between 1 minute and 7 days) for which the load is displayed.

Use of the Radio Channels

The graphs show how the load experienced by the individual radio channels through wireless networks in the vicinity of the FRITZ!Repeater. Sources of interference and frequencies occupied by a radar source are also displayed.

Wireless networks always influence several adjacent channels at the same time. This is why several radio channels used by the FRITZ!Repeater are displayed.